How to Install CyanogenMod on the Asus Zenfone 2 Laser/Selfie (1080p) ("Z00T")

From CyanogenMod
Jump to: navigation, search

This guide will walk you through the process of taking the Zenfone 2 Laser/Selfie (1080p) from stock to having a custom recovery image and the ability to flash the latest version of CyanogenMod.


Modifying or replacing your device's software may void your device's warranty, lead to data loss, hair loss, financial loss, privacy loss, security breaches, or other damage, and therefore must be done entirely at your own risk. No one affiliated with the CyanogenMod project is responsible for your actions. Good luck.

Important Notes

This is a unified build that supports ZE551KL, ZX551KL and ZD551KL.

Unlock and Install a Custom Recovery on the Zenfone 2 Laser/Selfie (1080p)

Obtaining the Bootloader Unlock Application

If the Bootloader on the Zenfone 2 Laser/Selfie (1080p) has already been unlocked, you may skip this section.

  1. Configure your computer for using ADB and fastboot.
  2. Navigate to Asus' support site for the Zenfone 2 Laser/Selfie (1080p).
  3. From the drop-down menu, select Android.
  4. Expand the section titled Utilities.
  5. Download the Unlock Device App.
  6. If the downloaded file is packaged in a zip archive, extract it.
  7. Open a command prompt or terminal to the location where the UnLock Device App apk resides.
  8. Install the apk using adb:
    adb install Name_of_unlock_app.apk
    For example, on the tf701 device, it would be adb install 0820-0954_SIGNED_UnLock_for_TF701_repart.apk
  9. Run the application "Unlock Device Tool" from the device and agree to the terms.
    Note 1: if you have two-factor authentication enabled on your Google account, you will have to generate an individual app password on the Google accounts settings website, as the ASUS unlock app does not natively support two-factor.
    Note 2: After you agree with the terms, the Asus unlock app will ask you to login with your gmail account. If your password does not works, then you need to enable temporary access for less secure apps at .
  10. Reboot the device.

Installing recovery using fastboot

See All About Recovery Images for more information about custom recoveries and their capabilities.

  1. If you haven't done so already, configure your computer for using ADB and fastboot.
  2. Download recovery -- you can directly download the recovery image using the link below, or visit the CWM or TWRP site to check for the latest version of custom recovery (if your device can be found there). Be careful to select the right image!
  3. Connect the Zenfone 2 Laser/Selfie (1080p) to the computer via USB.
  4. Make sure the fastboot binary is in your PATH or that you place the downloaded image in the same directory as fastboot.
  5. Open a terminal on your PC and reboot the device into fastboot mode by typing adb reboot bootloader or by using the hardware key combination.
    If your stock ROM is a Jellybean release, this should drop you into fastboot mode. If your stock ROM is an ICS release, you will likely need to use the Vol Down key to highlight fastboot from a boot menu and then and press Power to select it.
  6. Once the device is in fastboot mode, verify your PC sees the device by typing fastboot devices
    • If you don't see your device serial number, and instead see "<waiting for device>", fastboot is not configured properly on your machine. See fastboot documentation for more info.
    • If you see "no permissions fastboot", make sure your UDEV rules are setup correctly.
  7. Flash recovery onto your device by entering the following command: fastboot flash recovery your_recovery_image.img where the latter part is the name of the file you downloaded.
  8. Once the flash completes successfully, reboot the device into recovery to verify the installation.
    • Note: Some ROMs overwrite recovery at boot time so if you do not plan to immediately boot into recovery to install CyanogenMod, please be aware that this may overwrite your custom recovery with the stock one.

The Zenfone 2 Laser/Selfie (1080p) should now be ready to install CyanogenMod.

Installing CyanogenMod from recovery

  1. Make sure your computer has working adb.
  2. Download the CyanogenMod build package for your device that you'd like to install to your computer.
    Optional: Download 3rd party applications packages, like Google Apps which are necessary to download apps from Google Play.
  3. Place the CyanogenMod .zip package, as well as any optional .zip packages, on the root of /sdcard:
    • Using adb: adb push /sdcard/
    Note: You can copy the .zip packages to your device using any method you are familiar with. The adb method is used here because it is universal across all devices and works in both Android and recovery mode. If you are in recovery mode, you may need to ensure /sdcard (sometimes called Internal Storage) is mounted by checking its status in the Mounts menu. If you have booted regularly, USB debugging must be enabled.
  4. If you are not already in recovery, boot to recovery mode now.
    • Hold Volume Down & Power simultaneously.
  5. In Team Win Recovery Project, select menu choices by tapping on the appropriately labelled button.
  6. Optional (Recommended): Select the Backup button to create a backup.
  7. Select Wipe and then Factory Reset.
  8. Select Install.
  9. Navigate to /sdcard and select the CyanogenMod .zip package.
  10. Follow the on-screen notices to install the package.
  11. Optional: Install any additional packages you wish using the same method (if you are installing multiple packages, install CyanogenMod first and then install any subsequent packages on top of it).
  12. Once installation has finished, return to the main menu and select Reboot, then System. The device will now boot into CyanogenMod.

Helpful Tip

See something wrong on this page? Click here: Report a Wiki Problem.